The Eps line cutter is a computer controlled machine that is capable of cutting eps material in three phase coordinates. By using a computer-controlled micromotor to move, the cutting function is completed under the cutting of the heating wire. Precision control allows the machine to cut almost any given shape. The thickness of the cut is the same as the thickness of the material used. By designing and cutting different interfaces of a workpiece, complex three-dimensional materials can also be produced, which has a very wide range of applications.
The eps line cutter is a precision CNC machine that cuts eps foam into any shape of molding. According to the graphic input from the computer, the electric heating wire and the working platform driven by the servo motor are driven to move in the X-axis and Y-axis directions simultaneously, and the foam is cut horizontally and vertically, so that the foam material can be quickly and accurately cut. Each of the eps line cutters has five precision servo motors that control the movement of the platform and the high-performance Nichrome heating wire.
Daily inspection of the eps foam cutting machine:
1. Check the total air inlet of the eps foam cutting machine for garbage, and whether the valves and pressure gauges are working properly.
2. Check all the air pipe joints for looseness, all the tubes are not damaged, and if necessary, tighten or replace.
3. Check if all the transmission parts are loose, check the gear and the rack, and adjust if necessary.
4. Check the clamping block, the steel belt and the guide wheel for looseness and the tightness of the steel belt, and adjust if necessary.
5, loosen the tightening device, push the pulley by hand, should come and go freely, if there are abnormal conditions, it should be adjusted or replaced in time.
6. Check if the terminal is loose (refer to the relevant electrical instructions for specific operation) Check the performance of all buttons and selector switches, and replace the damage.
7. Check the power cabinet and the operating platform, whether the fastening screws are loose, and clean the dust inside the cabinet with a vacuum cleaner or a hair dryer.
Botou Mayor Lin Machinery Equipment Manufacturing Co., Ltd. (http://) is committed to building China's economical and practical eos European component equipment, CNC foam cutting machine, EPS line equipment, the company solemnly promises: the company's machinery independent research and development, purchase machinery free delivery technology , free installation, to ensure that you get qualified products! ! Equipment free warranty for the year! !
Http://news.chinawj.com.cn
August 26, 2022